RoofTec XCS 500 RoofTec System 3.8L
Each
- RoofTec XCS 500 RoofTec System, so much more than just a pressure washer.
- You need the ability to soft wash and pressure wash all with the same equipment.
- The XCS500 does both and is designed for quick setup, chemical adjustment on the fly and years of hassle-free operation.
- This machine package includes everything you need to start cleaning residential exterior surfaces.
- Use it for cleaning concrete roof tiles, block paving, composite decking, vinyl siding, concrete, wood decks, clay tiles, brick, UPVC, asphalt drive ways, stone masonry and more.
- 21 litre/Minute, High Performance General Pump with Stainless steel heads and ceramic plungers for chemical injection
- Extremely reliable and quiet 14hp Kohler Engine able to run for 7 hours on a single tank of fuel
- Adjust between 100 and 2500 psi quickly with a pressure regulator
- Adjust SH easily between 0 and 6% and meter surfactant flow from 0 to 38 Litres/Minute
eFill Controlled Dose Concentrates Control costs and eliminates waste. The eFill range of controlled dose concentrates gives you all the cost-effective cleaning power you need in one neat little package.The handy-size 1 litre bottle will fill up to 100 triggers, see full range >> |
RoofTec XCS 500 RoofTec System, so much more than just a pressure washer.
You need the ability to soft wash and pressure wash all with the same equipment.
The XCS500 does both and is designed for quick setup, chemical adjustment on the fly and years of hassle-free operation.
This machine package includes everything you need to start cleaning residential exterior surfaces.
Use it for cleaning concrete roof tiles, block paving, composite decking, vinyl siding, concrete, wood decks, clay tiles, brick, UPVC, asphalt drive ways, stone masonry and more.
- 21 litre/Minute, High Performance General Pump with Stainless steel heads and ceramic plungers for chemical injection
- Extremely reliable and quiet 14hp Kohler Engine able to run for 7 hours on a single tank of fuel
- Adjust between 100 and 2500 psi quickly with a pressure regulator
- Adjust SH easily between 0 and 6% and meter surfactant flow from 0 to 38 Litres/Minute
High pressure cleaning:
Set up to 2500 psi for concrete cleaning
Set up to 1000 psi for wood cleaning
Able to use standard pressure washing tips, oscillating tip, or up to a 50mm surface cleaner
Use metering valves on machine to pre-treat and post-treat with cleaning solutions
low pressure cleaning:
Set to below 600 psi for more delicate substrates (roofing, siding, etc.)
Mix manifold injects both surfactants and high strength sodium hypochlorite
Uses food-grade, stainless steel suttner spray gun with j-rod
Spray up to 10 to 12 metres for easy roof and siding cleaning from the ground
Specifications:
Engine speed - 2500 rpm (max) / 900 rpm (idle)
Water pump rpm - 1785 rpm (max)
Water pump flow rate - 21 litre/minute (max)
Bleach tank capacity - 415 litres
Utility tanks capacity - 45 litres (each)
Console weight - 291 kg (dry)
Max operating weight - 835 kg (full tanks)
Dimensions (h×d×w) - 104.14 x 149.86 x 121.92 cm
Included solution hose - 60 metres high pressure/chem resistant hose
Included supply hose - 30 metres standard 12mm garden hose
Included accessories - stainless steel spray gun, j-rod w/4 tips
Machinery Return-to-Base Warranty
All products are covered by a 12-month return- to-base warranty from the date of purchase. Machinery Return-to-Base Warranty
Should you encounter any manufacturing faults or issues with your product after you have purchased it, you should first access the comprehensive user manuals that we provide to attempt troubleshooting.
If there is still a fault, the Customer will need to return – at your own cost – the faulty products(s) for testing and repair. The Customer must ensure that all items are packaged securely as {{config path="general/store_information/name"}} (nor the manufacturer) is not liable for any loss or damage caused as a result of any poorly sealed package during transit.
Should the manufacturer find no fault with the product or that repair is down to user error and is not covered by the warranty, our customer services team will contact you advising you of any additional costs to repair. Please note that products where no faults are found or fault is not covered by the warranty, it is the customer’s responsibility to arrange for the item to be collected.
There are many things that are not covered by warranty and where this is the case, the Customer will need to pay for any repairs.
Common exceptions may include the following, but not limited to:
- Misuse
- Site issues (eg. room temperatures/ventilation/positioning)
- Failure to clean or maintain the product in accordance with instructions
- Incorrect, poor or faulty installation/re-assembly
- Physical damage
- Damage/blockages caused by foreign objects
- Faults caused by poor quality products/detergents etc.
- Failure to comply with the instructions supplied with the product
Before returning your item, we strongly suggest you carry out checks to ensure the fault is with the product itself and covered by the warranty.
Please contact us to confirm the terms of the warranty and to provide you with a returns number and return address for your package.
Please note {{config path="general/store_information/name"}} will not accept responsibility for any defect or failure of goods notified after the expiry of the warranty period no matter when the defect or failure occurred — this includes prior to the warranty expiry date.
{{config path="general/store_information/name"}} is not liable for any loss of profits, business interruption or sales issues that may occur directly, indirectly or incidentally due to a defective or faulty commercial unit. It is the customer’s responsibility to ensure that these eventualities are prepared for, as such {{config path="general/store_information/name"}} cannot offer any replacement to cover this loss of equipment.