Uoi
Description
Blue Horizons Chlorine Stabiliser Granules is a traditional, granular chlorine donor that is still popular with many pool owners that like dose rate flexibility. These granules are rapid dissolving making prep-dissolving and application easy.
The granules have a pH value of about 6.0 - 7.0, which is fairly close to the ideal pool water pH level and so will have little effect on the pH level of your pool water.
Another feature of Stabilised Chlorine Granules is that they contain Cyanuric acid (chlorine
stabiliser), this can be beneficial for outdoor pools as it reduces the amount of chlorine lost to sunlight - making it easier for you to maintain the correct chlorine level in your pool.
Please refer to the Blue Horizons Pool Care guide for further product information in our downloads section.
Blue Horizons Rapid Dissolving Chlorine Stabiliser Granules Application Instructions:
1. Maintain pH levels within the ideal range of 7.2 - 7.6. If the level is not in this range, adjust accordingly.
2. Maintain free chlorine residuals routinely in the 1 - 3 mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (10ppm) for a full shock treatment.
3. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons ( 10 litres) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool whilst the pump is turned ON preferably near the water inlets to aid distribution.
4. Repeat dose/application if necessary to achieve the desired level.
5. After using this product, pool water may become temporarily cloudy, so keep the filtration pump running until it clears.
6. After shock treatment procedures allow the chlorine to drop below 5ppm before bathing recommences and in any event wait for at least 30 minutes before bathing recommences.
| Stabilised Chlorine Granules Dosing Rates | ||||
| Water Volumes | To Increase Pool Chlorine Level by | |||
| Litres | Gallons | 1mg/L (1ppm) | 2mg/L (2ppm) | 3mg/L (3ppm) |
| 4,545 | 1,000 | 8g | 16g | 24g |
| 11,360 | 2,500 | 21g | 42g | 63g |
| 22,700 | 5,000 | 41g | 82g | 123g |
| 45,450 | 10,000 | 83g | 166g | 249g |
Blue Horizons Rapid Dissolving Chlorine Stabiliser Granules General Precautions:
Dosing:
- Wear eye and face protection and ensure granules are not blown back into your face.
- Never mix with any other chemicals including cleaning products and chlorine products, as a dangerous reaction will occur.
- Do not pour this product into a pool skimmer basket containing chlorine tablets or any other product.
- When pre-dissolving product always add product to water not the other way round.
Blue Horizons Rapid Dissolving Chlorine Stabiliser Granules Handling & Storage:
- Handle products in a well-ventilated area, preferably outdoors.
- Wash hands after use.
- Ensure chemicals do not become damp in storage - store in a cool dry place.
THIS STABILISED CHLORINE GRANULES CONTAIN TROCLOSENE SODIUM, DIHYDRATE - EC Label 220-767-7
Blue Horizons Rapid Dissolving Chlorine Stabiliser Granules Risk
- Harmful if swallowed.
- Contact with acids liberates toxic gas.
- May cause sensitisation by inhalation and skin contact.
- Very toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment.
Blue Horizons Rapid Dissolving Chlorine Stabiliser Granules Safety
- Use Biocides safely. Always read the label and product information before use.
- Keep locked up and out of reach of children.
- If swallowed, seek medical advice immediately and show this container or label.
- Keep container dry.
- Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advise.
- In case of fire and/or explosion, do not breath fumes.
- This material and/or its container must be disposed of as hazardous waste.
- Avoid release to the environment.
- Refer to special instructions/safety data sheet.